User's Manual

ADA HEIGHT INSTALL GUIDETEC_TM_120 REV. B 02/02/2022 Page 47 of 74
CABINET SETUP
DRAWER OVERLAY PANEL INSTALLATION (CONT.)
FIG. 3. Pull the gasket from the drawer.
FIG. 5. Be sure the edges are aligned before clamping the drawer front
assembly.
FIG. 4a. Drill pilot holes through the drawer front assembly.
FIG. 4b. Pilot hole locations.
FI G. 7. Carefully fasten the panel to the drawer front. FIG. 6. Top drawer bracket skin bracket orientation vs. bottom drawer
skin bracket orientation.
TOP DRAWER
BOTTOM DRAWER