User's Manual

ADA HEIGHT INSTALL GUIDETEC_TM_120 REV. B 02/02/2022 Page 45 of 74
CABINET SETUP
DOOR OVERLAY PANEL INSTALLATION (CONT.)
FIG. 3. Pull the gasket from the door. FIG. 4. Be sure the edges are aligned before clamping the door
assembly.
FIG. 8. Be sure the door closes with the gasket flush against the unit.
FIG. 1. The articulating hinge uses keyhole slots. FIG. 2. STAINLESS STEEL MODELS ONLY: Remove the indicated door
skin bracket screws.
FIG. 5. Carefully drill pilot holes in the panel. FIG. 6. Carefully fasten the panel to the door front.
FI G. 7. Be sure the gasket is fully seated in the gasket channel.