User's Manual

ADA HEIGHT INSTALL GUIDETEC_TM_120 REV. B 02/02/2022 Page 43 of 74
CABINET SETUP
OPTIONAL LOCK INSTALLATION (CONT.)
FI G. 7. Completed installation.
FIG. 8. Be sure the door closes with the gasket flush against the unit.
FIG. 6. Be sure the lock is correctly aligned with the lock bracket.
FIG. 5. Install the door panel.
FIG. 4. Verify the lock cam turns towards the closest edge of the panel.
3. Install the lock assembly in the door panel.
See fig. 4.
NOTE: BE SURE THE LOCK CAM TURNS
TOWARDS THE LOCK BRACKET NOTCH.
4. Install the overlay panel. See “Door Overlay Panel
Installation” (page 44). See fig. 5.
5. Install the door assembly. See figs. 6 and 7.
6. Verify the door alignment and that the gasket seals
without gaps. See fig. 8. Adjust as needed.