User's Manual

ADA HEIGHT INSTALL GUIDETEC_TM_120 REV. B 02/02/2022 Page 41 of 74
LOGO INSTALLATION
CABINET SETUP
For door units, the TRUE logo ships separately to keep
the door field reversible. For instructions on reversing
the door, see “Reversing Door” (page 65).
When the door is oriented as desired, install the logo
as described below.
PROCEDURE
1. Locate the logo in the interior packaging. See fig.
1.
2. Determine the desired location for the logo. True
typically puts the logo at the midpoint (see fig. 2).
3. Remove the sticker backing and apply the logo to
the door. See figs. 3 and 4.
FIG. 4. Carefully apply the logo centered at the bottom of the door.
Adhesive bonds upon contact.
FIG. 3. Peel the backing from the adhesive.
FIG. 2. True logo installation location.
1"
25mm
11 13/16"
300mm
10 7/32"
260mm
TURADA-24-RS-A~S
FIG. 1 . Logo shipping location.