User's Manual

ADA HEIGHT INSTALL GUIDETEC_TM_120 REV. B 02/02/2022 Page 21 of 74
Front view
of unit
between
cabinets
OPTIONAL INSTALLATION
OPTIONAL INSTALLATION ROUGH
OPENING & PLAN VIEWS
[34-1/2" (877 MM) OPENING]
Optional installations use combinations of 2-1/2"
(64 mm) leveling legs, 6" (153 mm) grill, and custom
overlay panels to raise (or appear to raise) the overall
height of the unit. For standard installation rough
openings & plan views, see page 16. This section
shows the cabinet specifications for the following
configurations:
A. 2-1/2" leveling legs and 6" grill (stainless steel unit)
B. 2-1/2" leveling legs, 6" grill, and standard door
overlay panel
C. 2-1/2" leveling legs, 6" grill, and tall door overlay
panel
D. Standard leveling legs and tall door overlay panel
OPTIONAL INSTALLATION ROUGH OPENING
Please see the recommended dimensions for a
nonstandard rough opening below. The height includes
2-1/2" (64 mm) leveling legs in the measure. For unit
specifications, please see “Optional Installation Plan
Views” starting on page 21.
ANTI-SWEAT FOAM END PANELS
When installing two or more True units side-by-side,
be sure to leave at least 5/8" (16 mm) gap between the
cabinets, or install foam pads between the cabinets
and on any side with 0" clearance, to prevent moisture
from developing on applications.
If installing ant-sweat foam end panels, True
recommends applying a panel to each of the
units being joined together. To order foam pads,
contact our parts department at 844-849-6226 or
[e-mail].
HEIGHT
34-1/2"
(877 mm)
DEPTH
24"
(610 mm)
WIDTH
24"
(610 mm)
34-3/8"
(864 mm)
6"
(152 mm)
ROUGH OPENING
23-7/8"
(606 mm)
CUTOUT OPENINGS
To minimize the depth of the cutout opening, the
electrical outlet must be positioned as shown below.
Outlet must be flush with the wall.
2"
(51 mm)
2"
(51 mm)
Rear wall of cut out
8"
(203 mm)