User's Manual

15 INCH & 24 INCH INSTALL GUIDETEC_TM_070 REV. B 02/03/2021 Page 33 of 74
12
7
8
9
10
11
7. Tighten the clamp down on the beer line hose.
8. Connect the CO
2
hose to the tapper.
NOTE: TAPPER DESIGN VARIES BY AGE OF THE CABINET.
Older models (images 8 and 9)
Connect the CO
2
hose to the tapper and tighten the clamp. Be sure the
clamp is on the hose prior to connecting.
Newer models (images 10 and 11)
Remove the barbed fitting, and then thread the CO2 hose onto the
tapper.
9. Install the beer tapper onto the keg. The tapper has notches that must
line up. Once the notches are lined up, turn the tapper to secure it to
the keg.
INSTALLING DRAFT STANDARD AND HOOK UP (CONTINUED)