Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
TUC-27F-ADA-HC
Undercounter:
ADA Compliant Solid Door Freezer with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TUC-27F-ADA-HC TFQY016E TFQY016S TFQY01P TFQY0163
DESIGN
•
True's commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today's food
service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly
R290 hydro carbon refrigerant that has zero (0)
ozone depletion potential (ODP), & three (3)
global warming potential (GWP).
•
Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains -10°F (-23.3°C) cabinet
temperatures. Ideally suited for both frozen
foods and ice cream.
•
Sealed, cast iron, self-lubricating evaporator
fan motor and larger fan blades give True
undercounter units a more ecient, low
velocity, high volume airow design. This
unique design ensures faster temperature
recovery and shorter run times in the busiest of
food service environments.
•
Condensing unit access in back of cabinet,
slides out for easy maintenance.
•
Automatic defrost system time-initiated, time-
terminated.
CABINET CONSTRUCTION
•
Exterior - stainless steel front, top and ends.
Corrosion resistant GalFan coated steel back.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and solid
door are foamed-in-place using a high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global
warming potential (GWP).
•
3" (77 mm) diameter stem castors. 34" (864
mm) work surface height. Compliant with
American Disablities Act (ADA) requirements.
DOOR
•
Stainless steel exterior with clear aluminum
liner to match cabinet interior.
•
Door tted with 12" (305 mm) long recessed
handle that is foamed-in-place with a
sheet metal interlock to ensure permanent
attachment.
•
Positive seal self-closing door with 90°stay
open feature. Doors swing within cabinet
dimensions.
•
Magnetic door gaskets of one piece
construction, removable without tools for ease
of cleaning.
SHELVING
•
Two (2) adjustable, heavy duty PVC coated wire
shelves 23 ¼"L x 16"D (591 mm x 407 mm).
Four (4) chrome plated shelf clips included per
shelf.
•
Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on
½" (13 mm) increments.
COUNTERTOP PAN CAPACITY
•
Comes standard with 16 ( ⁄ size) 6 ⁄"L x 6 ¼"W
x 4"D (175 mm x 159 mm x 102 mm) clear
polycarbonate, NSF approved, food pans in
countertop prep area. Also accommodates
6" (153 mm) and 8" (204 mm) deep food pans
(supplied by others).
•
Countertop pan opening designed to t
varying size pan congurations with available
pan divider bars. Varying size pans supplied
by others.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1 phase,
15 amp dedicated outlet. Cord and plug set
included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ 5" (127 mm) diameter stem casters.
❑ Single overshelf.
❑ Double overshelf.
❑ Stacking collar.
❑ 30" (762 mm) deep,½" (13 mm) thick, white
polyethylene cutting board. Requires "L"
brackets.
❑ 30" (762 mm) deep,½" (13 mm) thick,
composite cutting board. Requires "L" brackets.
❑ Heavy duty 16 gauge tops.
❑ Exterior rectangular digital temperature display
(factory installed).
❑ Low prole models with 31 ⁄" (810 mm) work
surface height.
ELEVATION
RIGHT VIEW
27
9
/16"
(701 mm)
24
27
/32"
(632 mm)
55
29
/32"
(1421 mm)
30
1
/16"
(764 mm)
1"
(26 mm)
29
3
/4"
(756 mm)
33
11
/16"
(856 mm)
3
15
/16"
(101 mm)
3"
(77 mm)
12
5
/8"
(321 mm)
7
5
/16"
(186 mm)
2
5
/16"
(59 mm)
1
5
/8"
(42 mm)
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)