Spec Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
INNOVATION
MADE WITH
IN THE USA
8/20
TSSU-36-08-ADA-HC~SPEC3
TSSU-36-08-ADA-HC~SPEC3
Food Prep Table:
ADA Compliant Solid Door Sandwich/Salad Unit with Hydrocarbon Refrigerant~Spec Package 3

3" (77 mm) diameter stem castors
standard. Work surface 34" (864
mm) high to comply with the
Americans with Disabilities Act (ADA)
requirements.

Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydro
carbon refrigerant that has zero (0)
ozone depletion potential (ODP), &
three (3) global warming potential
(GWP).

Patented forced-air design holds
33°F to 41°F (.5°C to 5°C) product
temperature in food pans and cabinet
interior.

Complies with and listed under ANSI/
NSF-7.

Exterior - stainless steel front, top and
ends. Corrosion resistant GalFan coated
steel back.

Stainless steel, patented, foam
insulated lid and hood keep pan
temperatures colder, lock in freshness
and minimize condensation.
Removable for easy cleaning.

Interior - attractive, NSF approved, clear
coated aluminum liner. Stainless steel
oor with coved corners.

11 ¾" (299 mm) deep full length
removable cutting board included.
Sanitary, high density, NSF approved
white polyethylene provides tough
preparation surface.

Heavy duty PVC coated wire shelves.

Foamed-in-place using a high density,
polyurethane insulation that has zero
ozone depletion potential (ODP) and
zero global warming potential (GWP).
Model Doors Shelves
Pans
(top)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)W D† H*
TSSU-36-08-ADA-HC~SPEC3
2 4 8 36⁄ 30⁄ 36¾ ¼ 115/60/1 4.5 5-15P 7 255
924 766 934 N/A N/A 2.13 116
†Depth does not include 1" (26 mm) for rear bumpers.
* Height does not include 4" (1102 mm) for castors.