Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
TSSU-27-08-ADA-HC
Food Prep Table:
ADA Compliant Solid Door Sandwich/Salad Unit
with Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TSSU-27-08-ADA-HC TFNX02E TFNX02S TFNY01P TFNX023
DESIGN
•
True’s salad/sandwich units are designed with
enduring quality that protects your long term
investment.
•
True’s commitment to using the highest quality
materials and oversized refrigeration systems
provides the user with colder product temperatures,
lower utility costs, exceptional food safety and the
best value in today’s food service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly R290
hydrocarbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3) global
warming potential (GWP).
•
Energy ecient, factory balanced refrigeration
system with guided airow to provide uniform
temperature in food pans and cabinet interior.
•
Patented forced-air design holds 33°F to 41°F (.5°C
to 5°C) product temperature in food pans and
cabinet interior. Complies with ANSI/NSF-7.
•
Sealed, self-lubricating evaporator fan motor and
larger fan blades give True sandwich/salad units a
more ecient, low velocity, high volume airow
design.
•
Condensing unit access in back of cabinet, slides out
for easy maintenance.
CABINET CONSTRUCTION
•
Exterior - stainless steel front, top and ends.
Corrosion resistant GalFan coated steel back.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and solid
door are foamed-in-place using a high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global warming
potential (GWP).
•
3" (77 mm) diameter stem castors. 34" (864 mm)
work surface height.
DOOR
•
Stainless steel exterior with clear aluminum liner to
match cabinet interior.
•
Door tted with 12" (305 mm) long recessed handle
that is foamed-in-place with a sheet metal interlock
to ensure permanent attachment.
•
Positive seal self-closing door with 90°stay open
feature. Door swing within cabinet dimensions.
•
Magnetic door gasket of one piece construction,
removable without tools for ease of cleaning.
SHELVING
•
Two (2) adjustable, heavy duty PVC coated wire
shelves 23 ¼"L x 16"D (591 mm x 407 mm). Four (4)
chrome plated shelf clips included per shelf.
•
Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on ½" (13
mm) increments.
PAN CAPACITY
•
Comes standard with 8 ( ⁄size) 6 ⁄"L x 6 ¼”W x 4"D
(175 mm x 159 mm x 102 mm) clear polycarbonate,
NSF approved, food pans in countertop prep area.
Also accommodates 6" (153 mm) deep food pans
(supplied by others).
•
Countertop pan opening designed to t varying size
pan congurations with available pan divider bars.
Pans supplied by others.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
11 ¾" (299 mm) deep full length removable
cutting board included. Sanitary, high-density,
NSF approved white polyethylene provides tough
preparation surface.
•
Stainless steel, patented, foam insulated lid and
hood keep pan temperatures colder, lock in
freshness and minimize condensation. Removable
for easy cleaning.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and ready
for nal connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ Barrel lock (factory installed).
❑ Additional shelves.
❑ Single overshelf.
❑ Double overshelf.
❑ Flat lid.
❑ Sneezeguard.
❑ 19" (483 mm) deep,½" (13 mm) thick, white
polyethylene cutting board. Requires “L” brackets.
❑ 19" (483 mm) deep,¾" (20 mm) thick, white
polyethylene cutting board. Requires “L” brackets.
❑ 11 ¾" (299 mm) deep, ½" (13 mm) thick, composite
cutting board. Requires “L” brackets.
❑ 19" (483 mm) deep,½" (13 mm) thick, composite
cutting board. Requires “L” brackets.
❑ Crumb catcher. Requires crumb catcher cutting
board for proper installation.
❑ Pan dividers.
❑ Exterior rectanglular digital thermometer (factory
installed).
❑ Standard height unit with 5" (127 mm) diameter
castors. 36" (915 mm) work surface height.
RIGHT VIEW
ELEVATION
PAN LAYOUT
12
5
/8"
(321 mm)
7
5
/16"
(186 mm)
2
5
/16"
(59 mm)
27
9
/16"
(701 mm)
7"
(178 mm)
3
15
/16"
(101 mm)
29
3
/4"
(756 mm)
40
11
/16"
(1034 mm)
24
27
/32"
(632 mm)
30
1
/16"
(764 mm)
18
5
/16"
(466 mm)
6
1
/8"
(156 mm)
10
3
/4"
(274 mm)
55
29
/32"
(1421 mm)
1"
(26 mm)
33
11
/16"
(856 mm)
36
3
/4"
(934 mm)
1
/8"
(4 mm)
44
7
/16"
(1129 mm)
1
5
/8"
(42 mm)
HOOD
HINGE PIN
3"
(77 mm)
1
/2"
(13 mm)
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)