Use and Care

............ www.truemfg.com ............
66
True Food Service Equipment, Inc.
INSTALLATION / OPERATION INSTRUCTIONS
Thread castor into the underside of
cabinet frame rail.
Thread leg into cabinet bottom
frame rail.
The end of the leg is adjustable to
easy leveling.
Use the tool provided to tighten
the castor into place.
For leveling, insert the shim between
the castor and frame rail.
1 2
3
4
5
INSTALLATION OF LEGS AND CASTORS
TSSU, TWT, TUC, TPP
Important Safeguard for installation of leg/castor (Images 1-5 demonstrate procedure)
Securing Castors and Legs
Toobtainmaximumstrengthandstabilityoftheunit,itis
importantthatyoumakesureeachcastorissecure.Legsare
hand-tightenedsecurelyagainstthelowerrailassembly.The
bearingraceonthecastorofthetopedgeofthelegmust
makefirmcontactwiththerail.
Unit leveling
Fourlevelingshimshavebeenprovidedforlevelingcastored
unitspositionedonunevenfloors.Shimsmustbepositioned
betweenrailendandbearingrace.TRUErequiresafourshim
limittoeachindividualcastor.
A. Turnthebearingracecounter-clockwiseuntilthecabinet
islevel.Levelfronttobackandsidetoside.(diagonally)
B. Installthedesirednumberofshims,makingsuretheslot
oftheshimisincontactwiththethreadedstemofthe
castor.
C. Ifmorethanoneshimisused,turntheslotata90°angle
sotheyarenotinline.
D. Turnthebearingraceclockwisetotightenandsecurethe
castorbytighteningtheanchoringboltwitha3/4inch
open-endwrenchorthetoolprovided.
CAUTION
To avoid damage to lower rail assembly, slowly raise unit to
upright position.