Specification Guide

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
PLAN VIEW
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model Elevation Right Plan 3D
TSID-48-4
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, and
lower utility costs in an attractive self-
service display case that brilliantly displays
deli meats and cheese.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Gravity coil refrigeration system provides
high humidty environment for exceptional
preservation of meats and deli products.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 38°F to 40°F (3.3°C to
4.4°C).
• Automatic defrost system; time-initiated,
time-terminated.
• Condensing unit located behind grill in
back of unit. Entire system slides out for
easy cleaning and maintanance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip laminated
vinyl; white sides with black front and
back grills.
• Stainless steel counter top provides
surface for equipment such as registers
and point-of-purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel
fl oor with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with leg levelers.
DOORS
• Front and rear door assemblies feature
“Low-E”, double pane thermal glass. The
latest in energy effi cient technology.
• Each door fi tted with 12" (305 mm) long
handle.
• Self-closing doors. Sliding doors ride on
stainless steel V-Channel with stainless
steel bearings for smooth, even, positive
closure. Doors fi t within plastic channel
frame.
• Front glass doors slanted 12.52° to
minimize refl ection from overhead
lighting enhancing your cold product
presentations.
SHELVING
• Two (2) adjustable, heavy duty PVC coated
wire shelves. Top shelf dimension is
43
3
/4"L x 17
1
/2" D (1112 mm x 445 mm).
Bottom shelf dimension is 43
3
/4"L x 19"D
(1112 mm x 483 mm). Four (4) chrome
plated shelf clips included per shelf.
• Aluminum shelf support pilasters. Shelves
are adjustable on
1
/2" (13 mm) increments.
LIGHTING
• Case is equipped with front and rear light
sources for maximum product display.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Cabinet lighting utilizes electronic ballast
and T-8 bulbs for brighter illumination,
longer bulb life and increased energy
effi ciency. Lamps are safety shielded.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ 2
1
/2" (64 mm) diameter castors.
❒ 4" (102 mm) diameter castors.
❒ Ratchet locks (requires 2).
❒ Additional shelves.
❒ Low height models with 41
3
/4" (1061 mm)
work surface height.
❒ Remote cabinets (condensing unit
supplied by others; system comes standard
with 404A expansion valve and requires
404A refrigerant), consult factory
technical service department for BTU
information.
115/60/1
NEMA-5-15R
Display Case:
Single Duty Deli Case
TSID-48-4 TFQY30E TFQY46S TFQY30P TFQY303
REAR VIEW
RIGHT VIEW
29
3
/4"
(756 mm)
21
1
/2"
(547 mm)
50
1
/4"
(1277 mm)
12
1
/32"
(306 mm)
3
/16"
(5 mm)
48
1
/2"
(1232 mm)
29
5
/32"
(741 mm)
13
/16"
(21 mm)
30
1
/2"
(775 mm)
22
1
/2"
(572 mm)
12.52°
19
/32"
(16 mm)
13
/16"
(21 mm)
19"
(483 mm)
17
1
/2 "
(445 mm)