Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
84 3/8"
2144mm
6 1/16"
154mm
78 11/32"
1990mm
29 13/16"
757mm
1/2"
13mm
39 1/2"
1004mm
TSD-33-HC
R
TSD-33-HC
TSD Series:
Reach-In Solid Slide Door Refrigerator with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TSD-33-HC
DESIGN
•
True’s sliding door reach-in’s are designed
with enduring quality that protects your
long term investment.
•
True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydrocarbon
refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3)
global warming potential (GWP).
•
High capacity, factory balanced
refrigeration system that maintains cabinet
temperatures of 33°F to 38°F (.5°C to 3.3°C)
for the best in food preservation.
•
State of the art, electronically commutated
evaporator and condenser fan motors. ECM
motors operate at higher peak eciencies
and move a more consistent volume of air
which produces less heat, reduces energy
consumption and provides greater motor
reliability.
•
Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows for
storage area on top of unit.
CABINET CONSTRUCTION
•
Exterior - Stainless steel front. Anodized
quality aluminum ends. Corrosion resistant
GalFan coated steel back.
•
Interior - attractive, NSF approved, clear
coated aluminum liner. Stainless steel oor
with coved corners.
•
Insulation - entire cabinet structure and
solid doors are foamed-in-place using a
high density, polyurethane insulation that
has zero ozone depletion potential (ODP)
and zero global warming potential (GWP).
•
Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
•
Frame rail tted with 6" (153 mm) legs.
DOORS
•
Stainless steel exterior insert with mitered
plastic channel frame. Interior liners are
clear aluminum to match cabinet interior.
Doors fully insulated using the same
foaming process as the cabinet.
•
Each door tted with 12" (305 mm) long
molded plastic handle.
•
Self-closing doors, ecient counter
balanced weight system for smooth, even,
positive closure. Sliding doors ride on
stainless steel V-Channel with stainless
steel bearings. Doors t within plastic
channel frame.
SHELVING
•
Six (6) adjustable, heavy duty PVC coated
wire shelves 17 ¼"L x 21 ⁄"D (439 mm x
537 mm). Four (4) chrome plated shelf clips
included per shelf.
•
Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on ½" (13 mm) increments.
LIGHTING
•
LED Interior lighting - safety shielded lights
activated by rocker switch mounted above
doors.
MODEL FEATURES
•
Exterior temperature display.
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
NSF/ANSI Standard 7 compliant for open
food product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 2 ½" (64 mm) diameter castors
❑ 4" (102 mm) diameter castors
❑ Siesmic/anged legs
❑ Door locks.
❑ Stainless steel interior
❑ Additional shelves
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)