Spec Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
INNOVATION
MADE WITH
IN THE USA
TS-23F-HC
TS Series:
Reach-In Solid Swing Door Stainless Steel Freezer with Hydrocarbon Refrigerant
TS-23F-HC

True’s TS series is the choice for the
exclusive stainless steel commercial
application.

Designed using the highest quality
materials and components to
provide the user with colder product
temperatures, lower utility costs,
exceptional food safety and the
best value in today’s food service
marketplace.

High capacity, factory balanced
refrigeration system that maintains
-10°F (-23.3°C) temperatures. Ideal for
both frozen foods and ice cream.

Stainless steel interior and exterior
front, sides and doors. The very
nest stainless with higher tensile
strength for fewer dents and scratches.
Matching aluminum back.

Adjustable, heavy duty PVC coated
gray shelves.

Positive seal self-closing doors.
Lifetime guaranteed door hinges and
torsion type closure system.

Automatic defrost system time-
initiated, temperature-terminated.
Saves energy consumption and
provides shortest possible defrost
cycle.
Bottom mounted units feature:

”No stoop” lower shelf.

Storage on top of cabinet.

Compressor performs in coolest, most
grease free area of kitchen.

Easily accessible condenser coil for
cleaning.
Model Doors Shelves
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)W D H*
TS-23F-HC 1 3 27 29½ 78⁄ ½ 115/60/1 3.7 5-15P 9 310
686 750 1991 ½ 230-240/50/1 1.9 ▲ 2.74 141
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
▲Plug type varies by country.
2/19