User's Manual

TEC_TM_009 REV. E03/31/2022Page 8 of 56 TRUE RESIDENTIAL
®
Proud
TR-30 – 29-¾"
(756.7 mm)
TR-36 – 35-¾"
(908 mm)
PRIOR TO INSTALLATION
SITE PREPARATION
Rough Opening dimensions. (See figure 1). For FLUSH installations the front face of the unit will be flush with
the surrounding cabinets. (See figure 2). For PROUD (Standard) installations, the front face of the unit will extend
beyond cabinets. (See figure 3).
NOTE: IT IS NOT RECOMMENDED TO INSTALL UNITS SIDE BY SIDE WITH HINGES TOUCHING
EACH OTHER. IF YOU PLAN TO INSTALL UNITS HINGE TO HINGE, CALL TECH SUPPORT AT
844-746-9423 FOR INSTALLATION INSTRUCTIONS.
TR-30/36 – TOP VIEW
FIGURE 3 – PROUD INSTALL
23 25/32"
604mm
PROUD INSTALL
25 25/32"
655mm
FLUSH INSTALL
TR-30REF-R-SG-A
R
TR-30/36 – TOP VIEW
FIGURE 2 – FLUSH INSTALL
23 25/32"
604mm
PROUD INSTALL
25 25/32"
655mm
FLUSH INSTALL
TR-30REF-R-SG-A
R
TR-30 TR-36
*Because of the weight of this unit, it is recommended to consult a flooring expert prior to installation. The flooring beneath the unit
should be rated to support at least 150 pounds per square foot.
TR-30/36 – FRONT VIEW
FIGURE 1 – ROUGH OPENING
& ELECTRICAL AREA
84"
(2134 mm)
PROUD
INSTALL
84
1
/
4
"
(2140 mm)
FLUSH
INSTALL
77"
(1956 mm)
2"
(51 mm)
8"
(204 mm)
Electrical located
in this area.
Dimensions may vary by ± 1/8" (3.2 mm)
Flush Opening Dimensions Proud Opening Dimensions
Width Depth Height Width Depth Height
30¼" 25
25
⁄32" 8 4¼" 29¾" 23
25
⁄32" 84"
Flush Opening Dimensions Proud Opening Dimensions
Width Depth Height Width Depth Height
36¼" 25
25
⁄32" 8 4¼" 35¾" 23
25
⁄32" 84"
Flush
TR-30 – 30-¼"
(769 mm)
TR-36 – 36-¼"
(921 mm)