User's Manual

TEC_TM_009 REV. E 03/31/2022 Page 45 of 56TR-30/36 INSTALL MANUAL

DUAL ZONE OPERATION

MODE

LIGHT

ALARM

55°F

45°F

ZONE

MODE

LIGHT

ALARM

ZONE

ZONEZONE

ZONE 1 UPPER

55°F

ZONE 2 LOWER

45°F

ZONE 1 UPPER

55°F

ZONE

ZONE 1 UPPER

55°F

45°F

UPPER ZONE 55ºF / LOWER ZONE 45ºF

To adjust set-point, press the ZONE button to highlight

the zone for adjustment. Once the zone is highlighted,

press DOWN or UP key on the control panel in multiple

key strokes until the desired set-point is achieved.

Each key stroke equals a one degree change and is

accompanied by an audible beep. When the desired

set-point is reached, press the ZONE button to return

to “HOME” screen.

SET POINT NAVIGATION

TEMPERATURE ADJUSTMENT

NOTE: THE TEMPERATURE RANGES FROM

40°F (4.4°C) TO 65°F (18.3°C) IN EITHER

SECTION OF THE UNIT

INITIAL FACTORY SET-POINTS ARE 55°F

(12.7°C) IN THE UPPER ZONE AND 45°F

(7.2°C) IN THE LOWER ZONE.

THE INITIAL STROKE OF THE UP OR DOWN

KEY WILL CHANGE THE PREVIOUS SET-POINT

BY ONE DEGREE.