User's Manual

TEC_TM_009 REV. E 03/31/2022 Page 37 of 56TR-30/36 INSTALL MANUAL
To adjust set-point, press DOWN or UP key on control
panel in multiple key strokes until the desired set-
point is achieved. Each key stroke equals a one degree
change and is accompanied by an audible beep. When
the desired set-point is reached wait 5 seconds until
display resumes “HOME” screen.
NOTE: THE TEMPERATURE RANGE IN A
FREEZER ZONE IS -4°F (-20°C) TO +4°F
(-16°C).
REFRIGERATOR / FREEZER OPERATION
MODE
LIGHT
ALARM
38°F
No Action
(5 sec)
OR
38°F
38°F
REFRIGERATOR
REFRIGERATOR 38ºF / FREEZER 0ºF
SET POINT NAVIGATION
TEMPERATURE ADJUSTMENT
THE TEMPERATURE RANGE IN A
REFRIGERATOR ZONE IS +34°F (+1°C) TO
+42°F (+6°C).
INITIAL FACTORY SET-POINTS ARE 0°F
(-18°C) IN A FREEZER ZONE AND 38°F (3°C)
IN A REFRIGERATOR ZONE.
THE INITIAL STROKE OF THE UP OR DOWN
KEY WILL CHANGE THE PREVIOUS SET-POINT
BY ONE DEGREE.