User's Manual

TEC_TM_009 REV. E03/31/2022Page 32 of 56 TRUE RESIDENTIAL

CABINET SETUP

REFRIGERATOR STORAGE

GLASS SHELVES

Remove the top foam piece holding the glass shelves. Carefully remove shelves and set aside. (See Figure 2).

Remove all other packing material. To install, insert glass shelf into the shelf standards on the back wall, with the

front tilted upward, and then lower the front until it stops. (See Figure 3). To remove or adjust a glass shelf, tilt up,

and then lift up and out.

DOOR BINS

The door bins are located in the bottom drawer of the refrigerator. (See Figure 5). To install, push tabs into the

slots in the door and slide downward unit it stops. (See Figure 6). To remove or adjust a door bin, lift up and away

from door back.

NOTE: BE CAUTIOUS OF PLACING TALL ITEMS IN TOP DOOR BIN, AS ITEMS MIGHT INTERFERE

WITH UI CONTROL PANEL.

SHELVING, BINS, DRAWERS

All shelving and door bins come packaged inside the

unit. (See Figure 1)

FIG. 2.

Remove shelving from interior

packaging.

FIG. 5.

Packaged door bins.

FIG. 1.

Interior packaging.

FIG. 3.

Hook the shelves into the shelf

standards.

FIG. 6.

Hook the door bins into the door slots.

FIG. 4.

Final glass shelf installation.

FI G . 7.

Final door bin installation.