User's Manual

TEC_TM_009 REV. E03/31/2022Page 26 of 56 TRUE RESIDENTIAL
®
INSTALLATION
LEVELING THE UNIT
It is very important that the refrigerator sits level. This
will insure that the doors will align and seal properly
and that the drain pans will not spill over.
PROCEDURE
1. Place a level on the interior floor. Check and adjust
for level from front to back, also check and adjust
for level from right to left.
2. Adjust the fronts using a set of pliers or a wrench.
(See Figure 1).
3. Adjust the rear using a 7/16" socket and ratchet.
(See Figure 1) Turn clockwise to raise the rear of
the unit.
LEG ADJUSTMENTS
FIG. 1. Leg adjustments
REAR LEG
ADJUSTMENT
FRONT LEG
ADJUSTMENT