Spec Sheet

STANDARD FEATURES
Model:
PLAN VIEW
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)
TPP-AT-93D-6-HC
Food Prep Table:
Solid Drawers Pizza Prep Table with Alternate
Top & Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TPP-AT-93D-6-HC
DESIGN
•
True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional food
safety and the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly R290
hydrocarbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3) global
warming potential (GWP).
•
High capacity, factory balanced refrigeration
system with guided airow to provide uniform
temperature in food pan rail and cabinet interior.
•
Forced-air design holds 33°F to 41°F (.5°C to 5°C)
product temperature in food pans and cabinet
interior. Complies with ANSI/NSF-7.
•
Condensing unit accessed from behind front
removable panel, slides out for easy maintenance.
CABINET CONSTRUCTION
•
All stainless steel front, top and ends. Corrosion
resistant GalFan coated steel back.
•
Stainless steel, patented, foam insulated at lids
keep pan temperatures colder, lock in freshness,
and minimize condensation.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and drawer
facings are foamed-in-place using a high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global warming
potential (GWP).
•
5" (127 mm) diameter stem castors. 36" (915 mm)
work surface height.
DRAWERS
•
Stainless steel exterior drawer facings and liners.
Stainless steel drawer frames.
•
Each drawer tted with 12" (305 mm) long recessed
handle that is foamed-in-place with a sheet metal
interlock to ensure permanent attachment.
•
Magnetic drawer gaskets of one piece
construction, removable without tools for ease of
cleaning.
•
Heavy-duty stainless steel drawer slides and rollers.
Removable without tools for easy cleaning.
•
Each drawer accommodates two (2) full size 12"L
x 20”W x 8"D (305 mm x 508 mm x 204 mm) food
pans (sold separately). Drawer will support varying
pan congurations with pan dividers bars (drawer
pans and divider bars optional).
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
Extra-deep 19 ½" (496 mm), full length removable
cutting board included. Sanitary, high-density,
NSF approved white polyethylene provides tough
preparation surface.
•
Alternate top 13° pan angle. Stainless steel,
patented, foam insulated lids keep pan
temperatures colder, lock in freshness, and
minimize condensation.
•
Refrigerated pan rail comes standard with twelve
( ⁄size) 12 ¾"L x 6 ¼”W x 6"D (324 mm x 159 mm x
153 mm) NSF approved clear polycarbonate insert
pans.
•
Front discharge design.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and ready
for nal connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ 4" (102 mm) diameter castors.
❑ 3" (85 mm) diameter castors.
❑ 2 ½” (64 mm) diameter castors.
❑ Garnish racks.
❑ 19 ½" (496 mm) deep, ½" (13 mm) thick,
composite cutting board.
❑ Pan dividers.
❑ Exterior digital temperature display (factory
installed).
38 7/8"
987mm
44 5/8"
1133mm
93 7/16"
2373mm
5 3/4"
146mm
5"
127mm
29 5/8"
752mm
36"
915mm
4 5/16"
109mm
7"
177mm
23 1/32"
585mm
1/4"
7mm
EACH SIDE FOR
CUTTING BOARD
BRACKETS AND
SCREWS
1"
26mm
36 5/16"
922mm
33 5/8"
854mm
1 21/32"
42mm
42 25/32"
1087mm
54"
1372mm
57 1/2"
1461mm
22 29/32"
582mm
18"
457mm
1 31/32"
50mm
57 7/16"
1459mm
21 1/8"
536mm
TPP-AT-93D-6-HC