Spec Sheet

STANDARD FEATURES
Model:
PLAN VIEW
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)
TPP-AT-93D-2-HC
Food Prep Table:
Solid Door & Drawers Pizza Prep Table with
Alternate Top & Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TPP-AT-93D-2-HC
DESIGN
•
True’s commitment to using the highest quality
materials and oversized refrigeration systems provides
the user with colder product temperatures, lower utility
costs, exceptional food safety and the best value in
today’s food service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly R290
hydrocarbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3) global warming
potential (GWP).
•
High capacity, factory balanced refrigeration system
with guided airow to provide uniform temperature in
food pan rail and cabinet interior.
•
Forced-air design holds 33°F to 41°F (.5°C to 5°C)
product temperature in food pans and cabinet interior.
Complies with ANSI/NSF-7.
•
Condensing unit accessed from behind front removable
panel, slides out for easy maintenance.
CABINET CONSTRUCTION
•
All stainless steel front, top and ends. Corrosion resistant
GalFan coated steel back.
•
Stainless steel, patented, foam insulated at lids keep
pan temperatures colder, lock in freshness, and minimize
condensation.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved corners.
•
Insulation - entire cabinet structure, solid doors, and
drawer facings are foamed-in-place using a high density,
polyurethane insulation that has zero ozone depletion
potential (ODP) and zero global warming potential
(GWP).
•
5" (127 mm) diameter stem castors. 36" (915 mm) work
surface height.
DOORS / DRAWERS
•
Door or drawer assemblies can be located in any section
of the cabinet. Location of door/drawers must be
indicated at time of ordering.
•
Doors constructed of stainless steel exterior with clear
aluminum liner to match cabinet interior. Drawers have
stainless steel exterior facings and liners with stainless
steel frames.
•
Each door and drawer tted with 12" (305 mm) long
recessed handle that is foamed-in-place with a sheet
metal interlock to ensure permanent attachment.
•
Positive seal doors swing within cabinet dimensions.
•
Magnetic door/drawer gaskets of one piece
construction, removable without tools for ease of
cleaning.
•
Heavy-duty stainless steel drawer slides and rollers.
Removable without tools for easy cleaning.
•
Each drawer accommodates two (2) full size 12"L x
20”W x 8"D (305 mm x 508 mm x 204 mm) food pans
(sold separately). Drawer will support varying pan
congurations with pan dividers bars (drawer pans and
divider bars optional).
SHELVING
•
Four (4) adjustable, heavy duty PVC coated wire shelves.
Two (2) right and two (2) left section shelf dimensions
are 23 ⁄"L x 28"D (601 mm x 712 mm). Center door
shelf dimensions are 25 ½"L x 28"D (648 mm x 712 mm).
Four (4) chrome plated shelf clips included per shelf.
•
Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on ½" (13 mm)
increments.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate the potential of
corrosion.
•
Extra-deep 19 ½" (496 mm), full length removable
cutting board included. Sanitary, high-density,
NSF approved white polyethylene provides tough
preparation surface.
•
Alternate top 13° pan angle. Stainless steel, patented,
foam insulated lids keep pan temperatures colder, lock
in freshness, and minimize condensation.
•
Refrigerated pan rail comes standard with twelve
( ⁄size) 12 ¾"L x 6 ¼”W x 6"D (324 mm x 159 mm x 153
mm) NSF approved clear polycarbonate insert pans.
•
Front discharge design.
•
NSF/ANSI Standard 7 compliant for open food product.
ELECTRICAL
•
Unit completely pre-wired at factory and ready for nal
connection to a 115/60/1 phase, 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ 4" (102 mm) diameter castors.
❑ 3" (85 mm) diameter castors.
❑ 2 ½” (64 mm) diameter castors.
❑ Barrel locks available for door sections. Requires one per
door (factory installed).
❑ Garnish racks.
❑ Half bun tray rack (door section only). Holds up to
eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold
separately).
❑ 19 ½" (496 mm) deep, ½" (13 mm) thick, composite
cutting board.
❑ Pan dividers.
❑ Exterior round digital temperature display (factory
installed).
38 7/8"
987mm
44 5/8"
1133mm
93 7/16"
2373mm
5 3/4"
146mm
5"
127mm
29 5/8"
752mm
36"
915mm
4 5/16"
109mm
7 1/16"
180mm
23 1/32"
585mm
1/4"
7mm
EACH SIDE FOR
CUTTING BOARD
BRACKETS AND
SCREWS
1"
26mm
36 5/16"
922mm
33 5/8"
854mm
1 21/32"
42mm
42 25/32"
1087mm
54"
1372mm
57 1/2"
1461mm
23 5/8"
600mm
18"
457mm
1 31/32"
50mm
58 1/4"
1480mm
21 15/16"
558mm
21 1/8"
536mm
TPP-AT-93D-2-HC