Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
PLAN VIEW
TPP-AT-67-HC
Food Prep Table:
Solid Door Pizza Prep Table Alternate Top with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
TPP-AT-67-HC
DESIGN
•
True’s commitment to using the highest quality
materials and oversized refrigeration systems
provides the user with colder product temperatures,
lower utility costs, exceptional food safety and the
best value in today’s food service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly R290
hydrocarbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3) global
warming potential (GWP).
•
High capacity, factory balanced refrigeration system
with guided airow to provide uniform temperature
in food pan rail and cabinet interior.
•
Forced-air design holds 33°F to 41°F (.5°C to 5°C)
product temperature in food pans and cabinet
interior. Complies with ANSI/NSF-7.
•
Condensing unit accessed from behind front
removable panel, slides out for easy maintenance.
CABINET CONSTRUCTION
•
All stainless steel front, top and ends. Corrosion
resistant GalFan coated steel back.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and solid
doors are foamed-in-place using a high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global warming
potential (GWP).
•
5" (127 mm) diameter stem castors. 36" (915 mm)
work surface height.
DOORS
•
Stainless steel exterior with white aluminum liner to
match cabinet interior.
•
Each door tted with 12" (305 mm) long recessed
handle that is foamed-in-place with a sheet metal
interlock to ensure permanent attachment.
•
Positive seal doors swing within cabinet dimensions.
•
Magnetic door gaskets of one piece construction,
removable without tools for ease of cleaning.
SHELVING
•
Four (4) adjustable, heavy duty PVC coated wire
shelves 23 ⁄"L x 28"D (601 mm x 712 mm). Four (4)
chrome plated shelf clips included per shelf.
•
Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on ½" (13
mm) increments.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
Extra-deep 19 ½" (496 mm), full length removable
cutting board included. Sanitary, high-density,
NSF approved white polyethylene provides tough
preparation surface.
•
Alternate top 13° pan angle. Stainless steel,
patented, foam insulated lids keep pan
temperatures colder, lock in freshness, and minimize
condensation.
•
Refrigerated pan rail comes standard with nine
( ⁄size) 12 ¾"L x 6 ¼”W x 6"D (324 mm x 159 mm x
153 mm) NSF approved clear polycarbonate insert
pans.
•
Front discharge design.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and ready
for nal connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ 4" (102 mm) diameter castors.
❑ 3" (85 mm) diameter castors.
❑ 2 ½" (64 mm) diameter castors.
❑ Barrel locks (factory installed). Requires one per
door.
❑ Garnish rack.
❑ Single overshelf.
❑ Double overshelf.
❑ Half bun tray rack. Each holds up to eleven 18"L
x 26"D (458 mm x 661 mm) sheet pans (sold
separately).
❑ 19 ½" (496 mm) deep, ½" (13 mm) thick, composite
cutting board.
❑ Half bun tray rack(s). Holds up to eleven 18"L x 26"D
(458 mm x 661 mm) sheet pans (sold separately).
❑ Exterior round digital temperature display (factory
installed).
67 3/8"
1711mm
44 5/8"
1133mm
5 3/4"
146mm
5"
127mm
38 7/8"
987mm
1/4"
7
EACH SIDE FOR
CUTTING BOARD
BRACKETS AND
SCREWS
29 3/4"
756mm
23 1/32"
585mm
4 3/16"
107mm
36"
915mm
7"
177mm
33 5/8"
854mm
36 5/16"
922mm
1 21/32"
42mm
1"
26mm
57 1/2"
1461mm
54"
1372mm
42 25/32"
1087mm
18"
457mm
23 5/8"
600mm
1 31/32"
50mm
58 1/4"
1480mm
21 15/16"
558mm
TPP-AT-67-HC
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)