Spec Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
Front Left View Straight-On Front View
Top View Right Side View
INNOVATION
MADE WITH
IN THE USA
3/20
TPP-AT-60D-2-HC~SPEC3
Food Prep Table:
Solid Door & Drawers Pizza Prep Table with Alternate Top & Hydrocarbon Refrigerant~Spec Package 3
TPP-AT-60D-2-HC~SPEC3

True’s pizza prep tables are designed
with enduring quality that protects
your long term investment.

Oversized, environmentally friendly
(R134A) forced-air refrigeration
system holds 33°F to 41°F (.5°C to
5°C).

Complies with and listed under
ANSI/NSF-7.

Stainless steel front, top, sides, and
back. Heavy-duty 20 gauge front
facing and 16 gauge work surface.

Stainless steel, patented, foam
insulated at lids keep pan
temperatures colder, lock
in freshness, and minimize
condensation.

Interior - Stainless steel liner.
Stainless steel oor with coved
corners.

Extra-deep 19 ½" (496 mm) full
length removable cutting board
included. Sanitary, high density,
NSF approved white polyethylene
provides tough preparation surface.

Heavy duty, PVC coated wire shelves
(door sections).

Each drawer accommodates two
(2) full size 12"L x 20“W x 8"D (305
mm x 508 mm x 204 mm) pans (sold
separately).

Foamed-in-place using a high
density, polyurethane insulation that
has zero ozone depletion potential
(ODP) and zero global warming
potential (GWP).
Model Doors Drawers Shelves
Pans
(top)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)W D† H*
TPP-AT-60D-2-HC~SPEC3
1 2 2 8 60¼ 33⁄ 38⁄ ¼ 115/60/1 3.9 5-15P 11 TBD
1530 854 987 ¼ 230-240/50/1 1.8 ▲ 3.35 TBD
† Depth does not include 1" (26 mm) for rear bumpers and 1¾" (44 mm) for cutting board.
* Height does not include 5¾" (146 mm) for castors or 6" (153 mm) for optional legs.
▲Plug type varies by country.