Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
(U.S.A. and Canada only)
Model Elevation Right Plan 3D Back
THAC-36DG-HC-LD
THAC-36DG-HC-LD
THAC Series: Horizontal Air Curtain:
"Dry Goods" Refrigerated Merchandiser with
Hydrocarbon Refrigerant & LED Lighting
DESIGN
•
Designed using the highest quality materials
and components to provide the user with colder
product temperatures and lower utility costs
in an attractive merchandiser that brilliantly
displays package food and beverage.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained refrigeration
system using environmentally friendly R290
hydrocarbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3) global
warming potential (GWP).
•
Time initiated, time terminated o cycle defrost
system
•
Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains cabinet temperatures of 35°F to 40°F
(1.6°C to 4.4°C).
•
Sealed, self-lubricated evaporator fan motor(s)
and larger fan blades give True merchandisers a
more ecient, low velocity, high volume airow
design, colder holding temperatures and faster
recovery in high use situations.
•
Condensing unit accessed from front of cabinet,
slides out for easy maintenance.
•
Exclusive reversing condenser fan motor. Fan
motor reverses during defrost o cycles to
help keep condenser coil free from dirt, dust
and debris. Keeping coils clean optimizes the
unit’s performance providing colder holding
temperatures and increased energy eciency.
Regularly scheduled thorough cleaning of coils
still recommended.
CABINET CONSTRUCTION
•
Exterior - non-peel or chip black powder coated
steel; durable and permanent.
•
Interior - attractive, black aluminum liner with
stainless steel oor.
•
Cabinet tted with leg levelers.
•
Insulation - entire cabinet structure is foamed-
in-place using a high density, polyurethane
insulation that has zero ozone depletion
potential (ODP) and zero global warming
potential (GWP).
SHELVING
•
Refrigerated Section has three (3) level tiered
stainless steel oor. Non-Refrigerated "Dry
Goods" section has two (2) adjustable, heavy
duty wire shelves 31 ⁄"L x 16 ¾"D (804 mm x
426 mm). Bottom of "Dry Goods" section can
also be used for storage 33"L x 20"D (839 mm x
508 mm).
DRY AREA
•
Stainless steel frame.
•
Two (2) tiered wire shelves.
•
LED Lighting located on top and each shelf.
•
Sliding rear doors.
LIGHTING
•
LED interior lighting, safety shielded.
MODEL FEATURES
•
Listed under NSF/ANSI Standard 7 for the
storage and/or display of packaged and bottled
product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1 phase
- 15 amp dedicated outlet. Cord and plug set
included.
RECOMMENDED OPERATION CONDITIONS
•
Designed to operate in an environment where
temperatures and humidity do not exceed 75°F
(24°C) and 55% relative humidity
•
Unit should not be installed near HVAC vents,
fans on doorways that will disrupt the air curtain
and compromise the function of the cabinet.
Unit should not be installed in direct sunlight.
•
Model will run most eciently when completely
loaded with product.
•
Drain plumbing hookup recommended.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ White exterior.
❑ Stainless exterior.
❑ 2" (51 mm) diameter castors
❑ Bumper guards.
❑ Night cover.
❑ Pressure safety control.