Spec Sheet
Specications subject to change without notice.
Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400
Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
TFP-72-30M-D-6
Food Prep Table:
Drawered Food Prep Unit
TFP-72-30M-D-6
True’s food prep units are designed
with enduring quality that protects
your long term investment.
Energy saving, environmentally
friendly (134A), exclusive forced-air
refrigeration system holds 33°F to
41°F (.5°C to 5°C).
All stainless steel front, top and
ends. Corrosion resistant GalFan
coated steel back.
Interior - attractive, NSF approved,
clear coated aluminum liner.
Stainless steel oor with coved
corners.
8" (204 mm) deep, ½" (13 mm) thick,
full length removable cutting board
included. Sanitary, high density,
NSF approved white polyethylene
provides tough preparation surface.
Each drawer accommodates one (1)
full size 12"L x 20”W x 6"D (305 mm x
508 mm x 153 mm) food pan & three
(3) ⁄ size or six (6) ⁄ size & three
(3) ⁄ size pans per drawer (sold
separately). Drawer will support
varying size pan congurations with
available pan divider bars (drawer
pans sold separately).
Heavy-duty stainless steel drawer
slides and rollers.
Foamed-in-place using a high
density, polyurethane insulation that
has zero ozone depletion potential
(ODP) and zero global warming
potential (GWP).
Model Drawers
Pans
(top)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)L D† H*
TFP-72-30M-D-6 6 30 72⁄ 31½ 45¾ ⁄ 115/60/1 5.1 5-15P 7 635
1832 801 1162 N/A N/A 2.13 288
†Depth does not include 2" (51 mm) for cutting board.
* Height does not include ¾" (19 mm) for castors.
INNOVATION
MADE WITH
IN THE USA
6/18-A