Spec Sheet

Specications subject to change without notice.
Chart dimensions rounded up to the nearest ⁄" (millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
TRUE MANUFACTURING CO., INC.
U.S.A. FOODSERVICE DIVISION
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone]
Fax [phone] • Toll Free [phone] • Intl Fax# [phone]
Parts Dept. (800)424-TRUE • Parts Dept. Fax# [phone] • www.truemfg.com
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
TFP-72-30M-D-2
Food Prep Table:
Door and Drawered Food Prep Unit
TFP-72-30M-D-2

True’s food prep units are designed with
enduring quality that protects your long
term investment.

Energy saving, environmentally friendly
(134A), exclusive forced-air refrigeration
system holds 33°F to 41°F (.5°C to 5°C).

All stainless steel front, top and ends.
Corrosion resistant GalFan coated steel
back.

Doors tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to ensure
permanent attachment.

Stainless steel, patented, foam insulated
lid and hood keep pan temperatures
colder, lock in freshness and minimize
condensation. Removable for easy
cleaning.

Interior - attractive, NSF approved, clear
coated aluminum liner. Stainless steel
oor with coved corners.

8" (204 mm) deep, ½" (13 mm) thick,
full length removable cutting board
included. Sanitary, high density, NSF
approved white polyethylene provides
tough preparation surface.

Each drawer accommodates one (1)
full size 12"L x 20”W x 6"D (305 mm x
508 mm x 153 mm) food pan & three
(3) ⁄ size or six (6) ⁄ size & three (3) ⁄
size pans per drawer (sold separately).
Drawer will support varying size
pan congurations with available
pan divider bars (drawer pans sold
separately).

Foamed-in-place using a high density,
polyurethane insulation that has zero
ozone depletion potential (ODP) and
zero global warming potential (GWP).
Model Doors Drawers Shelves
Pans
(top)
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)L D† H*
TFP-72-30M-D-2 2 2 4 30 72⁄ 31½ 45¾ ⁄ 115/60/1 5.1 5-15P 7 635
1832 801 1162 N/A N/A 2.13 288
†Depth does not include 2" (51 mm) for cutting board.
* Height does not include ¾" (19 mm) for castors.
Door or drawer assemblies can be located in any section of the cabinet. Location of
door/drawers must be indicated at time of ordering.
INNOVATION
MADE WITH
IN THE USA
6/18-A