Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
ELEVATION PLAN VIEW
83
5
/ 16 "
(2117 mm)
78
5
/16 "
(1990 mm)
5 "
(127 mm)
54
1
/ 8 "
(1375 mm)
29
1
/ 2 "
(750 mm)
25
17
/ 32 "
(649 mm)
55
1
/ 32 "
(1398 mm)
1
3
/8 "
(35 mm)
76
15
/ 16 "
(1955 mm)
4"
(102 mm)
T-49-HC
T-Series:
Reach-In Solid Swing Door Refrigerator with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
T-49-HC
DESIGN
•
True’s commitment to using the highest
quality materials and over sized refrigeration
systems provides the user with colder
product temperatures, lower utility costs,
exceptional food safety and the best value in
today’s food service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly
R290 hydro carbon refrigerant that has zero
(0) ozone depletion potential (ODP), & three
(3) global warming potential (GWP).
•
High capacity, factory balanced refrigeration
system that maintains cabinet temperatures
of 33°F to 38°F (.5°C to 3.3°C) for the best in
food preservation.
•
State of the art, electronically commutated
evaporator and condenser fan motors. ECM
motors operate at higher peak eciencies
and move a more consistent volume of air
which produces less heat, reduces energy
consumption and provides greater motor
reliability.
•
Bottom mounted condensing unit positioned
for easy maintenance. Compressor runs in
coolest and most grease free area of the
kitchen. Allows for storage area on top of unit.
CABINET CONSTRUCTION
•
Exterior - Stainless steel front. Anodized
quality aluminum ends. Corrosion resistant
GalFan coated steel back.
•
Interior - attractive, NSF approved, clear
coated aluminum liner. Stainless steel oor
with coved corners.
•
Insulation - entire cabinet structure and
solid door are foamed-in-place using a high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero
global warming potential (GWP).
•
Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
•
Frame rail tted with 4" (102 mm) diameter
stem castors - locks provided on front set.
DOORS
•
Stainless steel exterior with clear aluminum
liner to match cabinet interior. Doors extend
full width of cabinet shell. Door locks
standard.
•
Lifetime guaranteed recessed door handles.
Each door tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
•
Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
•
Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
•
Six (6) adjustable, heavy duty PVC coated wire
shelves 24 ⁄"L x 22 ⁄"D (624 mm x 569 mm).
Four (4) chrome plated shelf clips included
per shelf.
•
Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on
½" (13 mm) increments.
LIGHTING
•
LED Interior lighting - safety shielded. Lights
activated by rocker switch mounted above
doors.
MODEL FEATURES
•
Exterior temperature display.
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ Alternate door hinging (factory installed).
❑ Additional shelves.
❑ Half door bun tray racks. Each holds up to
eleven 18"L x 26"D (458 mm x 661 mm) sheet
pans (sold separately).
❑ Full door bun tray racks. Each holds up to
twenty-two 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately).
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)