Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
ELEVATION PLAN VIEW
83
5
/ 16 "
(2117 mm)
78
5
/16 "
(1990 mm)
5 "
(127 mm)
54
1
/ 8 "
(1375 mm)
29
1
/ 2 "
(750 mm)
25
17
/ 32 "
(649 mm)
55
1
/ 32 "
(1398 mm)
1
3
/8 "
(35 mm)
76
15
/ 16 "
(1955 mm)
4"
(102 mm)
T-49F-4-HC
T-Series:
Reach-In Solid Half Swing Door -10ºF Freezer
with Hydrocarbon Refrigerant
DESIGN
•
True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained, capillary
tube system using environmentally friendly
R290 hydro carbon refrigerant that has zero (0)
ozone depletion potential (ODP), & three (3)
global warming potential (GWP).
•
High capacity, factory balanced refrigeration
system that maintains -10°F (-23.3°C)
temperatures. Ideal for both frozen foods and
ice cream.
•
State of the art, electronically commutated
evaporator and condenser fan motors. ECM
motors operate at higher peak eciencies
and move a more consistent volume of air
which produces less heat, reduces energy
consumption and provides greater motor
reliability.
•
Bottom mounted condensing unit positioned
for easy cleaning. Compressor runs in coolest
and most grease free area of the kitchen. Allows
for storage area on top of unit.
•
Automatic defrost system time-initiated,
temperature-terminated. Saves energy
consumption and provides shortest possible
defrost cycle.
CABINET CONSTRUCTION
•
Exterior - Stainless steel front. Anodized quality
aluminum ends. Corrosion resistant GalFan
coated steel back.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and solid
doors are foamed-in-place using a high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global
warming potential (GWP).
•
Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
•
Frame rail tted with 4" (102 mm) diameter
stem castors - locks provided on front set.
DOORS
•
Stainless steel exterior with clear aluminum
liner to match cabinet interior. Doors extend full
width of cabinet shell. Door locks standard.
•
Lifetime guaranteed recessed door handles.
Each door tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
•
Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
•
Magnetic door gaskets of one piece
construction, removable without tools for ease
of cleaning.
SHELVING
•
Six (6) adjustable, heavy duty PVC coated wire
shelves 24 ⁄"L x 22 ⁄"D (624 mm x 569 mm).
Four (4) chrome plated shelf clips included per
shelf.
•
Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on ½"
(13 mm) increments.
LIGHTING
•
LED Interior lighting - safety shielded. Lights
activated by rocker switch mounted above
doors.
MODEL FEATURES
•
Exterior temperature display.
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
Rear airow guards prevent product from
blocking optimal airow.
•
NSF/ANSI Standard 7 compliant for open food
product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1 phase,
15 amp dedicated outlet. Cord and plug set
included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ 2 ½" (64mm) castors.
❑ 2 ½" (64 mm) standard legs.
❑ Alternate door hinging (factory installed).
❑ Novelty baskets.
❑ Additional shelves.
❑ Half door bun tray racks. Each holds up to
eleven 18"L x 26"D (458 mm x 661 mm) sheet
pans (sold separately) (airow guards need to
be removed).
Model Elevation Right Plan 3D Back
T-49F-4-HC
(U.S.A. only)