Spec Sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
78 3/8"
1991mm
83 3/8"
2118mm
5"
127mm
27"
686mm
4"
102mm
29 11/16"
754mm
1 9/16"
40mm
17/32"
14mm
31 13/16"
808mm
25 13/32"
646mm
55 3/4"
1416mm
T-23-1-G-1-HC~FGD01
T-23-1-G-1-HC~FGD01
T-Series:
Reach-In Combination Half Swing Door Refrigerator with
Hydrocarbon Refrigerant~Framed Glass Door Version 01
Model Elevation Right Plan 3D Back
T-23-1-G-1-HC~FGD01
DESIGN
•
True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydro
carbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3)
global warming potential (GWP).
•
High capacity, factory balanced
refrigeration system that maintains cabinet
temperatures of 33°F to 38°F (.5°C to 3.3°C)
for the best in food preservation.
•
State of the art, electronically commutated
evaporator and condenser fan motors. ECM
motors operate at higher peak eciencies
and move a more consistent volume of air
which produces less heat, reduces energy
consumption and provides greater motor
reliability.
•
Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows for
storage area on top of unit.
CABINET CONSTRUCTION
•
Exterior - Stainless steel front. Anodized
quality aluminum ends. Corrosion resistant
GalFan coated steel back.
•
Interior - attractive, NSF approved, clear
coated aluminum liner. Stainless steel oor
with coved corners.
•
Insulation - entire cabinet structure and
solid door are foamed-in-place using a high
density, polyurethane insulation that has
zero ozone depletion potential (ODP) and
zero global warming potential (GWP).
•
Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
•
Frame rail tted with 4" (102 mm) diameter
stem castors - locks provided on front set.
DOORS
•
Solid half door - stainless steel exterior
with clear aluminum liner to match cabinet
interior. Glass half door - “Low-E”, double
pane thermal glass assembly with extruded
aluminum frame. Door locks standard.
•
Solid door tted with 12" (305 mm) long,
lifetime guaranteed recessed handle.
Glass door tted with 15" (381 mm) long
extruded aluminum handle.
•
Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
•
Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
•
Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on ½" (13 mm) increments.
LIGHTING
•
LED interior lighting provides more even
lighting throughout the cabinet. Safety
shielded.
MODEL FEATURES
•
Exterior temperature display.
•
Evaporator is epoxy coated to eliminate the
potential of corrosion.
•
NSF/ANSI Standard 7 compliant for open
food product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ Alternate door hinging (factory installed).
❑ Additional shelves.
❑ Half door bun tray racks. Each holds up to
eleven 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately).
(U.S.A. only)