Use and Care

StanDaRD FeatuReS
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366 • [phone] • Fax [phone] • [phone] • Intl. Fax# [phone] • www.truemfg.com
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Plan VIew
KCL
T-50-GC-S
DESIGN
True’s glass and plate chiller/frosters
•
are designed with enduring quality and
value. Our commitment to using the
highest quality materials and oversized
refrigeration assures colder product
temperatures and years of trouble free
service.
REFRIGERATION SYSTEM
Factory engineered, self-contained,
•
capillary tube system using
environmentally friendly (CFC free) R404A
refrigerant.
Extra large evaporator coil balanced with
•
higher horsepower compressor and large
condenser; maintains cabinet temperatures
of 0°F (-17.7°C) and below.
Sealed, cast iron, self-lubricating
•
evaporator fan motor(s) and larger fan
blades give True chiller/frosters a more
ecient low velocity, high volume airow
design. This unique design ensures fast
frosting of dry glasses and plates.
Automatic defrost system time-initiated,
•
time-terminated.
Condensing unit accessed from behind
•
front grill, slides out for easy maintenance.
Forced-air cooling, positively guided
•
airow provide ecient balanced
temperatures throughout the cabinet.
CABINET CONSTRUCTION
Exterior - all stainless steel countertop,
•
lids, cabinet front and sides, matching
aluminum back.
Interior - long lasting, heavy duty
•
galvanized steel.
Insulation - entire cabinet structure is
•
foamed-in-place using Ecomate. A high
density, polyurethane insulation that has
zero ozone depletion potential (ODP) and
zero global warming potential (GWP).
Welded, heavy duty steel frame rail, black
•
powder coated for corrosion protection.
SHELVING
Five (5) adjustable, heavy duty PVC coated
•
wire shelves 15 ⁄"L x 19 ⁄"D (385 mm
x 491 mm). Split shelf design allows for
eective rotation of chilled smallware,
working with already chilled plates and
glasses on one side while chilling dry
product on the other side.
MODEL FEATURES
Evaporator is epoxy coated to eliminate the
•
potential of corrosion.
Listed under NSF-7 for the storage and/or
•
display of packaged or bottled product.
ELECTRICAL
Unit completely pre-wired at factory and
•
ready for nal connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
230 - 240V / 50 Hz. ❑
6" (153 mm) standard legs. ❑
6" (153 mm) seismic/anged legs. ❑
2 ❑ ½" (64 mm) diameter castors.
3" (77 mm) diameter castors. ❑
Ratchet locks and handles. Requires one ❑
per lid.
Floor racks. ❑
Remote cabinets (condensing unit supplied ❑
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant). Consult factory technical
service department for BTU information.
All remote units must be hard wired during
installation.
Underbar Refrigeration:
Solid Slide Lid Stainless Steel Glass and Plate
Chiller/Froster
Model Elevation Right Plan 3D Back
T-50-GC-S TFLY01E TFLY01S TFLY01P TFLY013
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)