Specification Sheet

STANDARD FEATURES
Model:
PLAN VIEW
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
T-49DT
DESIGN
•
True’s solid door reach-in’s are designed with
enduring quality that protects your long term
investment.
•
True’s commitment to using the highest quality
materials and oversized refrigeration systems
provides the user with colder product temperatures,
lower utility costs, exceptional food safety and the
best value in today’s food service marketplace.
REFRIGERATION SYSTEM
•
Equipped with two, independent, factory
engineered, self-contained, capillary tube
refrigeration systems using environmentally friendly
(CFC free) refrigerant. Refrigerator uses R134A and
freezer uses R404A.
•
Refrigerator located in left section; freezer in the
right.
•
Extra large evaporator coils balanced with higher
horsepower compressors and large condensers;
maintain colder standard temperatures for the best
in food preservation. Refrigerator holds 33°F to 38°F
(.5°C to 3.3°C); freezers holds -10°F (-23.3°C).
•
Sealed, cast iron, self-lubricating evaporator fan
motors and larger fan blades give True reach-
in’s a more ecient, low velocity, high volume
airow design. This unique design ensures faster
temperature recovery and shorter run times in the
busiest of food service environments.
•
Bottom mounted condensing units positioned for
easy cleaning. Compressors run in coolest and most
grease free area of the kitchen. Allows for storage
area on top of unit.
•
Automatic freezer defrost system time-initiated,
temperature-terminated. Saves energy consumption
and provides shortest possible defrost cycle.
CABINET CONSTRUCTION
•
Exterior - Stainless steel front. Anodized quality
aluminum ends, back and top.
•
Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel oor with coved
corners.
•
Insulation - entire cabinet structure and solid
doors are foamed-in-place using Ecomate. A high
density, polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global warming
potential (GWP).
•
Welded, heavy duty steel frame rail, black powder
coated for corrosion protection.
•
Frame rail tted with 4" (102 mm) diameter stem
castors - locks provided on front set.
DOORS
•
Stainless steel exterior with white aluminum liners
to match cabinet interior. Doors extend full width of
cabinet shell. Door locks standard.
•
Lifetime guaranteed recessed door handles. Each
door tted with 12" (305 mm) long recessed handle
that is foamed-in-place with a sheet metal interlock
to ensure permanent attachment.
•
Positive seal self-closing doors. Lifetime guaranteed
door hinges and torsion type closure system.
•
Magnetic door gaskets of one piece construction,
removable without tools for ease of cleaning.
SHELVING
•
Six (6) adjustable, heavy duty PVC coated wire
shelves 22 ⁄"L x 23 ¼"D (582 mm x 591 mm). Four
(4) chrome plated shelf clips included per shelf.
•
Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on ½" (13
mm) increments.
LIGHTING
•
Compartmentalized, incandescent interior lighting
(one per section) - safety shielded. Lights activated
by rocker switch mounted above doors.
MODEL FEATURES
•
Two (2) exterior digital temperature displays, one for
refrigerator section and one for freezer.
•
Evaporators are epoxy coated to eliminate the
potential of corrosion.
•
Freezer rear airow guards prevent product from
blocking optimal airow.
•
Minimum wattage heater in cabinet frame and
freezer door.
•
NSF-7 compliant for open food product.
ELECTRICAL
•
Unit completely pre-wired at factory and ready for
nal connection to a 115/208-230/60 hz, single
phase, 3 pole, 4 wire, 20 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" ( 153 mm) standard legs.
❑ 6" (153 mm) seismic/anged legs.
❑ Additional shelves.
❑ Novelty baskets.
❑ Half door bun tray racks. Each holds up to eleven
18"L x 26"D (458 mm x 661 mm) sheet pans (sold
separately) (airow guard needs to be removed
from freezer).
❑ Full door bun tray racks. Each holds up to twenty-
two 18"L x 26"D (458 mm x 661 mm) sheet pans
(sold separately) (airow guard needs to be
removed from freezer).
T-Series:
Reach-In Solid Swing Door Dual Temperature
Refrigerator/Freezer
Model Elevation Right Plan 3D Back
T-49DT TFEY56E TFEY03S TFEY02P TFEY563
WARRANTY *
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or
labor coverage for component failure or other damages resulting
from installation in non-commercial or residential applications.
*CABINET INTERIOR
Beginning in October of 2014, True Manufacturing began the
process of changing the standard interior nishes on select
products. The interior liners of these units have changed from the
traditional NSF-approved white aluminum to an NSF-approved clear
coated aluminum that is silver in color. In addition, the traditional
white PVC coated shelves have been switched to a gray PVC coating.
There are no functional dierences created by any of these changes,
the dierence is only in the appearance. The following product lines
are aected by this change: T-Series, TUC, TWT, TSSU, TFP, TPP, TMC,
TRCB. A sticker will be placed on the outside packaging so that units
with this change can be identied in inventory.