spec sheet

STANDARD FEATURES
Model:
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • [phone] • Fax [phone] • Toll Free [phone] • Intl. Fax# [phone] • www.truemfg.com
15
/16"
(24 mm)
60
1
/8"
(1528 mm)
ELEVATION
PLAN VIEW
63
1
/16"
(1602 mm)
5
/16"
(8 mm)
2
5
/8"
(67 mm)
64"
(1626 mm)
24
13
/16"
(631 mm)
23
7
/16"
(596 mm)
23
1
/32"
(585 mm)
46
15
/32"
(1193 mm)
T-12-HC
T-Series:
Reach-In Solid Swing Door Refrigerator with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
T-12-HC TFAY55E TFAY55S TFAY55P TFAY553
DESIGN
•
True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290 hydro
carbon refrigerant that has zero (0) ozone
depletion potential (ODP), & three (3)
global warming potential (GWP).
•
High capacity, factory balanced
refrigeration system that maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C) for the best in food
preservation.
•
State of the art, electronically
commutated evaporator and condenser
fan motors. ECM motors operate at
higher peak eciencies and move a more
consistent volume of air which produces
less heat, reduces energy consumption
and provides greater motor reliability.
•
Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows for
storage area on top of unit.
CABINET CONSTRUCTION
•
Exterior - Stainless steel front. Anodized
quality aluminum ends. Corrosion
resistant GalFan coated steel back.
•
Interior - attractive, NSF approved, clear
coated aluminum liner. Stainless steel
oor with coved corners.
•
Insulation - entire cabinet structure and
solid door are foamed-in-place using a
high density, polyurethane insulation
that has zero ozone depletion potential
(ODP) and zero global warming potential
(GWP).
•
Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
•
Base rail tted with leg levelers (legs not
available).
DOOR
•
Stainless steel exterior with white
aluminum liner to match cabinet interior.
Door extends full width of cabinet shell.
•
Lifetime guaranteed recessed door
handle. Door tted with 12" (305 mm)
long recessed handle that is foamed-
in-place with a sheet metal interlock to
ensure permanent attachment.
•
Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion type
closure system.
•
Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
•
Three (3) adjustable, heavy duty PVC
coated wire shelves 20 ⁄"L x 17"D (529
mm x 432 mm). Four (4) chrome plated
shelf clips included per shelf.
•
Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on ½" (13 mm) increments.
LIGHTING
•
Interior lighting - safety shielded. Lights
activated by rocker switch mounted
below door.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate
the potential of corrosion.
•
NSF/ANSI Standard 7 compliant for open
food product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for nal connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 2 ½" (64 mm) diameter castors.
❑ Additional shelves.
WARRANTY
Three year warranty on all parts
and laborand an additional 2 year
warranty on compressor.
(U.S.A. only)