Spec Sheet

METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
P roject N ame L ocatioN aia #
i tem # Q ty m odeL # SiS #


standard features

models
SPEC SERIES
®
  
Model Elevation Right Plan 3D Back
ST( )2H-4HS
HEATER SYSTEM
•
Cabinet designed to provide
holding temperatures of 140°F to
180°F (60°C to 82.2°C). Heating
system controlled by exterior
on/o switch and electronic
temperature control.
•
One (1) stainless steel (for
corrosion resistance),heating
element for uniform generation of
electric heat. Cabinet comes with a
total of 3000 watts.
•
Equipped with low-velocity fans
to assure even temperature
distribution throughout the
cabinet.
•
Manually controlled vent located
on top of the cabinet for positive
humidity control.
CABINET CONSTRUCTION
•
Insulation - entire cabinet
structure and solid door are
foamed-in-place using a high
density, polyurethane insulation
that has zero ozone depletion
potential (ODP) and zero global
warming potential (GWP).
•
5" (127 mm) diameter plate castors
- locks provided on front set.
DOORS
•
Lifetime guaranteed bolt style
door locks standard.
•
Lifetime guaranteed heavy duty all
metal working door handles.
•
Positive seal self-closing doors
with 120°stay open feature.
Lifetime guaranteed external cam
lift door hinges, four (4) per door
section.
•
Magnetic door gaskets of one
piece construction, removable
without tools for ease of cleaning.
MODEL FEATURES
•
Exterior digital temperature
display, available with either °F or
°C .
•
Designed to hold warm baked
or cooked food. Cabinet is not
designed to heat ambient or cold
product.
•
NSF-4 compliant for open food
product.
ELECTRICAL
•
True requires that a sole use circuit
be dedicated for the unit.
•
Unit comes with 3 feed wires
(including ground) to be
hardwired at installation site to a
208-240/60 Hz. single phase, 20
amp dedicated circuit.
OPTIONAL FEATURES/
ACCESSORIES
(upcharge & lead times may apply)
•
6" (153 mm) standard legs.
•
6" (153 mm) seismic/anged legs.
•
Additional shelves.
•
Stainless back. (STR, STA, STG)
SHELVING KIT OPTIONS
•
STR series kits factory installed at
no charge. STA &STG series kits
eld installed, upcharge applies,
lead times may apply.
•
Kit #1: Nine (9) sets of #1 type tray
slides and pilasters (eld installed),
bottom support of one (1) 18"L x
26"D (458 mm x 661 mm) pan or
two (2) 14"L x 18"D (356 mm x 458
mm) pans.
•
Kit #2: One (1) set half-section #2
steel rod tray slides and pilasters
(factory installed), rim support of
one (1) 18"L x 26"D (458 mm x 661
mm) pan.
•
Kit #3: Six (6) sets of universal type
tray slides and pilasters (factory
installed), bottom support of one
(1) 18"L x 26"D (458 mm x 661
mm) pan, two (2) 14"L x 18"D (356
mm x 458 mm) pans or two (2)
12"L x 20"D (305 mm x 508 mm)
pans.
•
Kit #4: Three (3) chrome shelves
26 ⁄"L x 21 ⁄"D (669 mm x 548
mm). Optional wall mounted shelf
support pilasters (eld installed)
with four (4) shelf clips per shelf
available; adjustable on ½" (13
mm) increments (must order at
time of cabinet order).
•
Stainless steel (electro polished)
shelves to be used with Kit Option
#4.
•
Additional kit option components
available individually. Upcharge
applies.
Three year warranty on all parts and labor.
(U.S.A. only)
WARRANTY*
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or labor
coverage for component failure, factory defect or any other damages for
units installed in non-commercial foodservice or residential applications.