Spec Sheet

KCL
P roject N ame L ocatioN aia #
i tem # Q ty m odeL # SiS #


standard features

models
SPEC SERIES
®
  
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D Back
ST( )2HRT-1S-1S
HEATER SYSTEM
•
Cabinet designed to provide
holding temperatures of 140°F
to 180°F (60°C to 82.2°C).
Heating system controlled
by exterior on/o switch and
electronic temperature control.
•
Two (2) stainless steel (for
corrosion resistance), nned
tube heating elements per
section (1000 watts each) for
uniform generation of electric
heat. Cabinet comes with a
total of 4000 watts.
•
Equipped with low-
velocity fans to assure even
temperature distribution
throughout the cabinet. Fans
are controlled by exterior on/
o switch.
•
Manually controlled vent
located on top of the cabinet
for positive humidity control.
CABINET CONSTRUCTION
•
Stainless steel breaker caps.
•
Insulation - entire cabinet
structure and solid door are
foamed-in-place using a
high density, polyurethane
insulation that has zero ozone
depletion potential (ODP) and
zero global warming potential
(GWP).
•
One (1) heavy gauge stainless
steel ramp per door.
•
Designed to accept roll-in
racks (inboard castors) with a
maximum dimension of 27"L
x 29"D x 66"H (686 mm x 737
mm x 1677 mm).
DOORS
•
Lifetime guaranteed bolt style
door locks standard.
•
Lifetime guaranteed heavy
duty all metal working door
handles.
•
Positive seal self-closing doors
with 120°stay open feature.
Lifetime guaranteed external
cam lift door hinges, Three (3)
per door section.
•
Magnetic door gasket of one
piece construction, removable
without tools for ease of
cleaning.
LIGHTING
•
Incandescent interior lighting;
lights activated by exterior on/
o switch, safety shielded.
MODEL FEATURES
•
Exterior, color coded,
temperature display; accurate
direct reading of internal
cabinet temperature.
•
Designed to hold warm baked
or cooked food. Cabinet is not
designed to heat ambient or
cold product.
•
Interior bumpers protect
cabinet walls from abuse
caused by roll-in carts.
•
12" x 20" (305 mm x 508
mm) pan for water included,
if additional humidity is
required.
•
NSF/ANSI Standard 4
compliant for open food
product.
ELECTRICAL
•
True requires that a sole use
circuit be dedicated for the
unit.
•
Unit completely pre-wired
at factory and ready for nal
connection to a 115/208-
240/60 Hz. single phase, 20
amp dedicated outlet. Cord
and plug set included.
OPTIONAL FEATURES/
ACCESSORIES
(upcharge & lead times may apply)
•
Field reversable hinge
•
Security package.
Three year warranty on all parts and labor.
(U.S.A. only)
WARRANTY*
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or labor
coverage for component failure, factory defect or any other damages for
units installed in non-commercial foodservice or residential applications.