STA1HRT 1S 1S Spec Sheet

KCL
P roject N ame L ocatioN aia #
i tem # Q ty m odeL # SiS #


standard features

models
SPEC SERIES
®
  
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D Back
ST( )1HRT-1S-1S
HEATER SYSTEM
•
Cabinet designed to provide
holding temperatures of 140°F to
180°F (60°C to 82.2°C). Heating
system controlled by exterior
on/o switch and electronic
temperature control.
•
Two (2) stainless steel (for
corrosion resistance), nned tube
heating elements (1000 watts
each) for uniform generation
of electric heat. Cabinet comes
with a total of 2000 watts.
•
Equipped with low-velocity fans
to assure even temperature
distribution throughout the
cabinet. Fans are controlled by
exterior on/o switch.
•
Manually controlled vent located
on top of the cabinet for positive
humidity control.
CABINET CONSTRUCTION
•
Stainless steel breaker caps.
•
Insulation - entire cabinet
structure and solid door are
foamed-in-place using Ecomate.
A high density, polyurethane
insulation that has zero ozone
depletion potential (ODP) and
zero global warming potential
(GWP).
•
One (1) heavy gauge stainless
steel ramp.
•
Designed to accept roll-in
racks (inboard castors) with a
maximum dimension of 27"L x
29"D x 66"H (686 mm x 737 mm x
1677 mm).
DOORS
•
Lifetime guaranteed bolt style
door locks standard.
•
Lifetime guaranteed heavy duty
all metal working door handles.
•
Positive seal self-closing doors
with 120°stay open feature.
Lifetime guaranteed external
cam lift door hinges, Three (3) per
door section.
•
Magnetic door gasket of one
piece construction, removable
without tools for ease of
cleaning.
LIGHTING
•
Incandescent interior lighting;
lights activated by exterior on/o
switch, safety shielded.
MODEL FEATURES
•
Exterior, color coded,
temperature display; accurate
direct reading of internal cabinet
temperature.
•
Designed to hold warm baked
or cooked food. Cabinet is not
designed to heat ambient or cold
product.
•
Interior bumpers protect cabinet
walls from abuse caused by roll-
in carts.
•
12" x 20" (305 mm x 508 mm) pan
for water included, if additional
humidity is required.
•
NSF-4 compliant for open food
product.
ELECTRICAL
•
True requires that a sole use
circuit be dedicated for the unit.
•
Unit completely pre-wired
at factory and ready for nal
connection to a 115/208-
240/60 Hz. single phase, 20 amp
dedicated outlet. Cord and plug
set included.
OPTIONAL FEATURES/
ACCESSORIES
(upcharge & lead times may apply)
•
Security package.
Three year warranty on all parts and labor
and an additional 2 year warranty on
compressor. (U.S.A. only)
WARRANTY*
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or
labor coverage for component failure or other damages resulting
from installation in non-commercial or residential applications.