Use and Care

26
True
glass door merchandisers
www
.truemfg.com
2
1
HOW TO dISplAy pRObE TEMpERATURES:
STEp 1 - To display T1 temperature, press and release the info button
.“t1”willappear.Seeimage1.
STEp 2 - Press and hold the info button . This is the temperature of
the T1 Probe. See image 2.
STEp 3 - By releasing the info button ,“t2”willappear.Pressandhold
the info button to display the temperature of the T2 probe.
STEp 4 - By releasing the info button again,“t3”willappear.Pressand
hold the info button to display the temperature of the T3 probe. (If
probeT3isnotactivated,“t3”willnotappearofthedisplay.)
dISplAyING TEMpERATURE pRObES, T1, T2, T3:
WHy: To display temperature probe readings in different locations of the cabinet.
dISplAy COdES
Display
Defrost in progress Room high temperature alarm
Controller in stand-by Room low temperature alarm
Door open alarm Probe T1 failure
Instant Probe 1 temperature Probe T2 failure
Instant Probe 2 temperature Probe T3 failure
Instant Probe 3 temperature Maximum probe 1 temperature recorded
Minutes of the Real Time Clock Minimum probe 1 temperature recorded
Hours of the Real Time Clock Keypad state lock
LAEControl
Manual Activation
Up Button
Info / Set Point
Button
Stand-By
Button
Manual Defrost /
Down Button