Use and Care

True

glass door merchandisers

www

.truemfg.com

CHANGING “dEfROST INTERVAlS”:

May need to unlock control.

Thiscanonlybechangedifdefrostmodeparameter“DFM”issetfor“TIM”.

WHy: The defrost interval is the time duration between defrost cycles. The defrost

interval time starts when the cabinet is supplied power or after a manual defrost.

HOW TO CHANGE “dEfROST INTERVAlS":

STEp 1 - To see the set point, press and hold the Info button

and the

Stand-by button

at the same time.

NOTE: Depending on the version of control, one of three parameters will

appear:“ScL”image1a,“SPL”image1b,“MdL”image1c.

STEp 2 - Push the Up button

until“dFt”appears.Seeimage2.

STEp 3 - Press and hold the Info button

to see the defrost interval

time. See image 3.

STEp 4 - While pressing and holding the Info button

, press the

or Down button to change the defrost interval times (higher

the number the less frequent the cabinet will defrost).

STEp 5 - Once the defrost interval time has been changed, release the Info

button

STEp 6 - Wait 30 seconds for the display to show temperature.

See image 4.

LAEControl

Manual Activation

Up Button

Info / Set Point

Button

Stand-By

Button

Manual Defrost /

Down Button