Use and Care

22
True
glass door merchandisers
www
.truemfg.com
CHANGING THE "SET pOINT":
May need to unlock control.
WHy: The set point is the temperature at which the compressor will shut off.
NOTE: The“setpoint”IS NOT the cabinet holding temperature.
HOW TO CHANGE THE “SET pOINT”:
STEp 1 - To see the set point, press and hold the Info button .
See image 1.
STEp 2 - While still holding the Info button , press the Up or
Down buttontochangethe“setpoint”.
STEp 3 - Once the “set point” has been set correctly release the Info
button . The display will show temperature. See image 2.
1
2
LAEControl
Manual Activation
Up Button
Info / Set Point
Button
Stand-By
Button
Manual Defrost /
Down Button