Use and Care

9
True
glass door merchandisers
www
.truemfg.com
TRUETRAC ORGANIzERS: TrueTrac organizers for Glass
Door Merchandisers come with a package of shelf retainer clips.
Installcliponthesidetotherearoforganizer(seeillustration)toend
oforganizerthatrestsagainstleftorrightoutsidewall.
With correct installation, the retainer clip should separate the rear of
theorganizerfromtherearinteriorwallofthecabinet.
NOTE:
NoretainerclipsneededoncenterorganizersofaGDM-69.
Shelf
Clip
Shelf
Shelf
Organizer
Pillaster
(I-beam)
Shelf
Standards
Retainer
Clip
T-Series
& GDM-5
Airflow
Guard
SETUp
Shelf Bracket
O-Ring
Shelf Retaining Screw
Glass Shelf
O-Ring
Shelf Retaining Screw
G4SM-23RGS SHELF BRACKET ASSEMBLY
STANdARd ACCESSORIES
SHElVING INSTAllATION / OpERATION
SHElf INSTAllATION:
A. Hook shelf clips onto shelf standards.
B. Position all four shelf clips equal in distance from the floor for
flat shelves.
C. Lower front of gravity feed TrueTrac organizers to enable
proper feed.
D. Place shelves on shelf clips making sure all corners are seated
properly.
WIRE SHElVES: Wire shelves are oriented so that cross support
bars are facing down.
NOTE: GDM-5 models include an airflow guard on the rear of
shelves to maintain an air space at the rear of the cabinet. (see illus-
tration).