Manual

CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truef
itness.com / 800.426.6570 / 636.272.7100 17
ELLIPTICAL ASSEMBLY STEPS
STEP 7: Attach
Console (continued)
b) Tuck access wires into the neck and attach
the console to the neck using the 4 bolts
included with the console.
Required Hardware:
Included with console
c) Attach the Rear Console Cover using
2 M5x12mm screws.
Required Hardware (Bag 7):
2 M5x12mm
Screws
STEP 8: Floor Levelers
a) If necessary, adjust four levelers on bottom of machine to accommodate uneven flooring.
STEP 9: Remove Transport Handle Bars
a) Once Elliptical is moved into its final location, remove the two Handle Bars on the back of the machine and store
with owner’s manual for future use.
STEP 10: Remove Protective Film from Decals
a) Once Elliptical is moved into its final location, remove the protective film from the decals and from the “True” on
the lower shroud.
4 Bolts
2 Screws