TUI15 Installation Guide

24
TRUE RESIDENTIAL LINE
Press
LIGHT
to change bin light color. See instructions on page 30.
CLEAN
+
LIGHT
= Reset “FLT” (Filter Replacement Reminder).
CLEAN
+
SIZE
= Toggle between the “LSC” (Low Scale) and
“HSC” (High Scale) settings for incoming water.
ICE MACHINE DISPLAYS:
• OFF – Machine is off (unplug unit to
remove power to all components)
• ICE – Making ice
• HAr – Harvesting ice
• FUL – Bin is full
• FLT – Replace water filter
• BIg = 1, 2, 3, 4, 5 – Cube size setting
“1” = smallest, “5” = largest
• CLn – Cleaning Sequence
• Add – Add cleaning chemicals
(during cleaning sequence)
• Er1 – Failure of thermistor 1
• Er2 – Failure of thermistor 2
• drn – Drain pump failure
• Hot / 1* – Ambient too hot
• Hot / 2* – System too hot
• Cld / 1* – Ambient too cold
• Cld / 2* – System too cold
• LSC – Machine is set for low-scale water
• HSC – Machine is set for high-scale water
* Display will alternate between messages. For
example, the display will show “Hot” then
“1”, continuing to alternate back and forth.
REMOVABLE KICKPLATE
FOR EASY CLEANING
WATER
FILTER
ICE SCOOP AND
SCOOP HOLDER
SERIAL
NUMBER
TRUE PRECISION CONTROL
™
OPERATION
1 2 3 4 5
1. Power Button
2. Bin Light
3. Initiate Cleaning Sequence
4. Adjust Cube Size
5. Display
ADDITIONAL CONTROL FEATURES:
TRUE ICE
™
MACHINE COMPONENTS