Installation manual

TRUE RESIDENTIAL LINE

INSTALLATION OF CASTORS

IMPORTANT SAFEGUARD FOR INSTALLATION

OF CASTORS (IMAGES 1-3 DEMONSTRATE

PROCEDURE)

SECURING CASTORS AND LEGS

To obtain maximum strength and stability of the unit, it is

important that you make sure each castor is secure. The

bearing race on the castor or the top edge of the leg must

make firm contact with the rail.

UNIT LEVELING

Four leveling shims have been provided for leveling

castored units positioned on uneven floors. Shims must

be positioned between rail end and bearing race. Up to 3

(three) shims.

A. Turn the bearing race counter-clockwise until the

cabinet is level. Level front to back and side to side.

(diagonally).

B. Install the desired number of shims, making sure the

slot of the shim is in contact with the threaded stem of

the castor. (See image 2).

C. If more than one shim is used, turn the slot at a 90°

angle so they are not in line.

D. Turn the bearing race clockwise to tighten and secure

the castor by tightening the anchoring bolt with a

wrench or the tool provided. (See image 3).

SNUG FIT HERE

BEARING RACE

CASTOR

LEVELING SHIM

RAIL END

LOWER RAIL ASSEMBLY

USE THE TOOL PROVIDED TO TIGHTEN

THE CASTOR INTO PLACE

THREAD CASTOR INTO THE UNDERSIDE

OF CABINET FRAME RAIL

FOR LEVELING, INSERT THE SHIM

BETWEEN THE CASTOR AND FRAME RAIL

LEVELING SHIM