Operating Guide

11
Error Code
E1
E2
E3
E4
E5
E6
E7
E0
Cause and Potential Solution
No cookware or incompatible cookware used
Internal IGBT overheat
Voltage is over 145V.
Voltage is under 75V.
Top plate sensor open/short circuit
IGBT sensor open/short circuit
The cooking temperature is over 450 degrees Fahrenheit in the
EG TEMP mode. After 3 minutes in standby the unit will switch
off and can then be restarted.
Internal circuit error
VII. Compatible Cookware
If the display shows an error code, please reference this sheet for a potential solution:
SINGLE BURNER INDUCTION COOKTOP MANUAL 12.27.2016 Verison 2.0.01 P.9