Owner Manual

Cleaning Burned-on Residue:
WARNING: Damage to the glass surface may occur if you use scrub pads or any other type of abrasive cleaning
materials.
1. Allow the cooktop to cool.
2. Spread a few drops of the ceramic cooktop cleaner on the burned residue area.
3. Using the included ceramic cooktop cleaning pad, rub the residue area, applying pressure as needed.
4. If any residue remains, repeat the steps liste
d above.
5.
cleaner and a paper towel.
Cleaning heavy burned-on residue:
1. Allow the cooktop to cool.
2. Used a single-edge razor blade scraper approximately at a 45 degree angle against the glass surface, and scrape
off the residue.
3.
residue area. Use the cleaning pad to remove any remaining residue.
4.
cleaner and a paper towel.
Metal Marks and Scratches:
Be careful not to slide pots or pans across the cooktop surface. It will leave behind metal markings. These marks are
removable using the ceramic cooktop cleaner along with the cleaning pad for ceramic cooktops.
permanent.
NOTE:
manufacturer for assistance.
8
V I. Cleaning and Maintenance: