Instructions / Assembly

Instruction Manual
Outdoor Wall Sconce
Customer Service: [e-mail]
PACKAGE CONTENTS
A
DESCRIPTION QUANTITY
A Fixture 1
PART
B
BB
B
CC
HARDWARE CONTENTS(shown actual size)
WARNING
PREPARATION
Long
monting
screw
x 2
x 3
Wire nut
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before
beginning installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.
Estimated Assembly Times: 25 minnutes
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver,
Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Print in china
B
AA
Short
monting
screw
x 4
Mounting plate
(Not actual size)
B
DD
x 1
CAUTION: To avoid any waterproofing problems, please make sure the
light fixture fits the mounting surface perfectly installation and use
waterproof glue around the canopy for better sealing after installation.