Quick Start Guide

15
Tag Reading
Read Mode
Standard** – Press the Read button to scan a tag. Hold down the Read
button to continuously scan tags.
Continuous – Press the Read button to continuously scan tags. Scanning will
only stop when the Read button is pressed again.
Single – Press the Read button to scan a single tag. Even if you hold down the
Read button, another tag will not be scanned.
Tag Format - Format and example shown:
Decimal**
964 155000012939
Decimal2
964155000012939
Hex
8000F66416B8808B
ISO
1000000964155000012939
ISO23
A0000000964000000123456 (animal) or
R0000000964000000123456 (non-animal)
Allow Duplicates
No** – Set to ensure that an EID is not recorded multiple times in the same
session.
Yes – Set to allow EIDs to be recorded multiple times in the same session.
Allow Blank Data
On** – Set to allow leaving of empty fields during the data collection.
Off – Set to ensure all fields are entered during the data collection.
Offspring Mode
On – Set this mode to enable you to link a dam with her offspring so that you
can look up breeding histories.
Off** – Turn off offspring pairing.
For details about offspring mode refer to the Setup Guide -
XRS2/XRS2i Offspring Pairing. See Getting other detailed
information for details.