User's Manual

9
Modifying the panel reader settings using EziLink
Note: Do NOT connect the panel reader to the PC until you have installed the EziLink software supplied on the CD.
In order to modify the panel reader settings using EziLink, you must first install EziLink on the PC. Installation instructions are supplied with the
EziLink CD.
1 Connect the panel reader to a PC and launch EziLink as described in steps 1-3 of Transferring sessions from the panel reader to a PC using
EziLink on page 7.
2 Click .
3 Click on one of the tabs:
EziLink panel reader settings
User Interface tab
This tab allows you to modify the panel reader’s user interface.
Setting
Options
Explanation
Beeper
Enabled*
The panel reader normally beeps when a tag is read or a key is pressed. This can be disabled, if
required.
Disabled
Language
ENGLISH*
ESPAÑOL
PORTUGUÊS
FRANÇAIS
DEUTSCH
The panel reader’s user interface can be displayed in English, Spanish, Portuguese, French or
German.
Bluetooth® tab
This tab allows you to modify the panel reader’s Bluetooth settings.
Setting
Options
Explanation
Bluetooth Control
Auto*
The panel reader will automatically connect to previously used devices or other Tru-Test devices.
Manual
This setting should be used when connecting to a panel reader from an Android™ smartphone or
other Bluetooth enabled device.
Off
Disables the Bluetooth wireless connection.
XRP2 MAC Address
N/A (read only)
This is the unique address for the panel reader’s Bluetooth wireless connection module. This
address may be used to confirm the identity of the panel reader when it is searched for by another
device such as a PC.
Device Name
N/A
You can add to the list of paired devices by manually entering the name of a device, entering the
device’s unique MAC address and clicking Add Device to Paired List. This allows the panel
reader to be paired with a non-Tru-Test device.
Device MAC Address
N/A
Add Device to Paired
List
N/A
Devices XRP2 is paired
with
N/A
Lists previously paired devices.
Clear Paired Device List
N/A
Click on Clear Paired BT Device List to remove all previously paired devices from the panel
reader’s list of paired devices. You may want to do this to speed up automatic connection to a
new XR3000, or to prevent connection to a device that you accidentally paired to.
Set XRP2 Bluetooth PIN
Set PIN to 0000*
Set PIN to default
When pairing the panel reader with another Bluetooth enabled device (for example a mobile
phone), you may need to reset the panel reader’s Bluetooth PIN. This may be because the device
will only accept a PIN comprising either alphabetic characters or numeric characters.
By default, the panel reader’s Bluetooth PIN is set to 0000 (numeric characters), however if you
need to change it to default (alphabetic characters), select Set PIN to default.
If you are having trouble pairing the panel reader with another device, try resetting the PIN then
repeat the steps for pairing.