User's Manual
Table Of Contents
- XRP2 Panel Reader and Antenna User Manual
- Overview
- What’s in the box?
- Components of the Tru-Test XRP2 EID Panel Reader System
- Ways to use the panel reader
- Installing the panel reader and antenna
- Connecting to an indicator (optional)
- Recording EID tags
- Transferring information from the panel reader
- Modifying the panel reader settings
- Troubleshooting
- Caring for the panel reader and antenna
- Service and warranty information
- Upgrading the software
- Specifications
- Compliance
15
Specifications
Panel Reader
Size
205 mm x 220 mm x 74 mm (8‛ x 9.5‛ x 3‛)
Weight
1.1 kg (2½ lb)
Communications interface
RS232, 9600, N, 8, 1, no flow control.
Bluetooth
® wireless interface, class 1 with up to 100 m (300’) range
Operating temperature
-15° C to +55° C (5° F to 131° F)
Storage temperature
-40° C to +85° C (-40° F to 185° F)
Read range (typical)*
HDX - 1 m FDX - 1 m (with Tru-Test Large antenna).
Read rate*
HDX - ~850 FDX - ~1000 (max. reads per minute).
Memory capacity
Up to 20,000 scanned records
Tag compatibility
Reads both ISO HDX and ISO FDX-B.
Supply voltage
12-24 V dc, 7 W, reverse polarity protected
Operating frequency
134.2 kHz ±5 ppm
Antennas
Large antenna
Small antenna
Size
873 mm x 603 mm x 38 mm (2’10½‛ x 2’ x 1½‛)
410 mm x 338 mm x 33 mm (1’4‛ x 1’2‛ x 1¼‛)
Read range (typical)
2
Up to 1 m - HDX and FDX
Up to 700 mm – HDX and FDX
2
Actual read range (read distance) depends on the installation (orientation of the tag to the antenna and the influence of electronic noise), the tag manufacturer and
the size of the tag.










