Datasheet

ManualsBrandsTRU COMPONENTS ManualsSensorsVibration sensor Reading range: 360 ° (max)

Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-

92240 Hirschau

Datasheet

Item no. 1606630

V1_18012018_01_en

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems

require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.

Unit = mm

Electromagnetic vibration sensor

Inductance value 5.5±10%mH

DC impedance 130±10%ohm

Reaction orientation omnibearing

Pull force of terminal 500gf for 1 minute

Operating lifespan above 50000 circle

Enameled wire 2UEW0.06

Magnetic core NdFeB N42NI-CU-NI

Iron core 1215NI

Silica gel Toshiba silica gel

Pin foot CP Wire

Welding time 2-2.5 seconds

Main body frame T375J PHENOLIC UL-94V-0

Storage temperature -40°C to +85°C

Operating temperature -25°C to +85°C

Humidity 95% RH, 40℃ for 96 hours

Features

：

The sensor can output a faint current signal.The current is proportional to the vibration radiation, and then the

current is compared with the operational amplifier in the circuit amplified.

The circuit ends with a NPN triode through which the R9 outputs a pull-down signal.

The sensitivity can be appropriately adjusted by the VR1 in the circuit.