Datasheet

Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau
Datasheet
Item no. 1606636
V1_18012018_01_en
1
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by
the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.
© Copyright 2017 by Conrad Electronic SE.
Unit = mm
Roll ball type tilt trigger switch
Voltage: 1.5-12V
Current: <20mA
Conductive time: About 2ms
Closed resistance: <10 ohm
Open resistance: >10M ohm
Temperature range: -40 to 80
Pull force of terminal: 500gf for 1 minute
Humidity: 95% RH, 40
for 96 hours
Operating lifespan: 100000 cycles
Function
1.Horizontal tilt anti-fall detecting.
2.Vertical flip anti-fall detecting.
Features
when the product is upright, two pairs of parallel feet connected;
when the product is tilted in either direction and more than 45 ± 10
degrees, the switch is OFF.

Summary of content (1 pages)