Manual

BN 2144970
Arduino® compatible Data Logging Shield
EN Quick Instructions
Version: 1
Delivery Content
l Product
l Battery (CR1220)
Description
The product is an Arduino® data logging shield with pre-soldered pins.
It is generally compatible with Arduino® UNO boards.
Use the included RTC (Real Time Clock) to timestamp logged data
and the microSD card slot to save it to a microSD card.
Features
l Uses the ‘R3 layout’ I2C and ICSP/SPI ports
l Prototyping area for soldering connectors, circuitry or sensors
l Two configurable indicator LEDs
l Built-in 3.3 V regulator
SD Card interface
l Formfactor: microSD, min. 32 MB, max. 32 GB
l Formatting: FAT16 or FAT32
l Push to insert, pull to remove
l SD activity LED is connected to the clock pin
l The level shifter ensures 3.3 V
Real Time Clock
l 8 pin chip
l 32 kHz crystal
l Backup battery (CR1220)
Development Resources
Development resources and additional product information are avail-
able from:
https://www.conrad.de/ https://docs.makerfactory.io/
1